beautypg.com

Thermo Fisher Scientific CyberScan CON 400/410 (For units manufactured before March 2010, discontinued) User Manual

Page 12

background image

Instruction Manual

CON 400/410

- 6 -

3.3

Connecting the probe to the meter

1. Line up the notch and 6 pins on the meter with the holes in the 6-pin connector. Push

down and turn the locking ring clockwise to lock into place. See figure below.

2. To remove probe, turn the locking ring counterclockwise on the probe connector. Pull

probe away from the meter.


CAUTION: Do not pull on the probe cord or the probe wires might disconnect.
NOTE: Keep connectors clean. Do not touch connector with soiled hands.

Figure 5 - Connection for Conductivity probe (6-pin connector)