beautypg.com

Dimensions & specifications warranty, Troubleshooting – SHIMPO FGS-50PXL User Manual

Page 4

background image

KEY:

mm

(in)

LIMITED EXPRESS WARRANTY: Shimpo Instruments warrants, to the original purchaser of new products only, that this product shall be free from defects in
workmanship and materials under normal use and proper maintenance for one year from the date of original purchase. This warranty shall not be effective if the product
has been subject to overload, misuse, negligence, or accident, or if the product has been repaired or altered outside of Shimpo Instruments’s authorized control in any
respect which in Shimpo Instruments’s judgment, adversely affects its condition or operation.

DISCLAIMER OF ALL OTHER WARRANTIES: The foregoing warranty constitutes the SOLE AND EXCLUSIVE WARRANTY, and Shimpo Instruments hereby
disclaims all other warranties, expressed, statutory or implied, applicable to the product, including, but not limited to all implied warranties of merchantability and fitness.

LIMITATION OF REMEDY: Under this warranty, Shimpo Instruments’ SOLE OBLIGATION SHALL BE TO REPAIR OR REPLACE the defective product or part, at
Shimpo Instruments’ option. Shimpo Instruments reserves the right to satisfy warranty obligation in full by reimbursing Buyer for all payments made to Shimpo Instruments,
whereupon, title shall pass to Shimpo Instruments upon acceptance of return goods. To obtain warranty service, Purchaser must obtain Shimpo Instruments’s authorization
before returning the product, properly repackaged, freight pre-paid to Shimpo Instruments.

INDEMNIFICATION & LIMITATION OF DAMAGES: Buyer agrees to indemnify and hold Shimpo Instruments harmless from and against all claims and damages
imposed upon or incurred arising, directly or indirectly, from Buyer’s failure to perform or satisfy any of the terms described herein. In no event shall Shimpo Instruments
be liable for injuries of any nature involving the product, including incidental or consequential damages to person or property, any economic loss or loss of use.

MERGER CLAUSE: Any statements made by the Seller’s representative do not constitute warranties except to the extent that they also appear in writing. This writing
constitutes the entire and final expression of the parties’ agreement.

Dimensions & Specifications

Warranty

NOTE: The display ranges for length and rate are larger than what’s listed in the specifications. This is due to a
mechanical backlash which may occur if the drive assembly is subjected to excessive changes in direction.

Model

FGS-50PXH

FGS-50PXL

(Horizontal - Standard)

(Horizontal - Low Speed)

Capacity

110 lb (50 kg)

Stroke

5.5" (140 mm)

Travel Speed

Adjustable: 1.57-15.74"/min

Adjustable: 0.39-3.93"/min

(40-400 mm/min)

(10-100 mm/min)

Display

Four digit LED, 0.41" high (10.5 mm).

Reads in inches (0.01 resolution) or millimeters (0.1 resolution)

Power

120 VAC, 60 Hz

Weight

40 lb (18 kg)

OPTIONAL ACCESSORIES

UNI-Plate, FGV-CTRLCABLE, FGV-RS232, FGV-ANALOG,

DFS-CTRLCABLE, DFS-RS232 and DFS-ANALOG

Troubleshooting

The stand does not turn on:

• Check all electrical components (power source, power cord, fuse, power switch, emergency cut-off switch)

The mounting plate (force gauge) does not move:

• Check manual limit switches and adjust accordingly

• Check to see if the full travel range has already been achieved

• Check to be sure you are in the correct operating mode

The stand will not accept my program:

• The mounting plate (force gauge) must be at the home position

This manual is related to the following products: