Revo REXN700-2 - Manual (Page 9)

Privacy Zone can be configured with up to 10. Because they share area ID with
PVA Zone, It can not be used same ID.
1) Zone:
Select mask number.
NOTE:
*If you see "PVA" in the “Func” menu PVA Function is currently being used in the area.
2) Func
: Select mask on/off.
3) Color
: Select mask color (15 colors available).
4) Transparency:
Change the mask transparency.
5) Mosaic
: Making mosaic current area.
6) Frame : Border display current area.
7) Shape
: Select the shape of mask (4-point polygon or rectangle)
- Rect (Rectangle)
Adjust rectangle with 4-arrow keys. Press [ENTER] key is to finish edit area.
- Poly (4-Point Polygon/Each point can move)
It you select one of “a,b,c,d”, the active point is displayed. Move the point with 4-
arrow keys. Press [ENTER] key is to finish edit area.
NOTE:
* For more than 180 of interior angle is not permitted.
- Posi: Adjust area position with 4-arrow keys.
PVA is our unique name of our video analytics.
If you exit menu, doing Initialize started while 4~5 seconds the background.
During initialization the background, it is good to be none of moving objects.
When Day / Night mode is changed or Cam Set is changed, the background of the re-
initialization performed.
Global Functions
: This functions being performed in the entire area.
- Output Select
: It must be specify the outputs, each function will be enabled.
Press [Enter Key], to select output of each detection zone.
Alarm: Trigger alarm to output port.
Communication: Event string sends on RS-485
Screen: Display on screen.
Back: return to previous menu.
- Detections
Motion: General motion detection
Loitering
: Within a set period of time, detect loitering objects of entire screen.
NOTE:
* Please don’t use as a signal for video recording start.
* The result of loitering detection can be inaccuracy.
Abandon/Absent: Detect the difference to stored background.
NOTE:
* Please don’t use as a signal for video recording start.
* The result of abandon/absent detection can be inaccuracy.
9