Revo REXN700-2 - Manual (Page 13)

- All Object: Tracking all detected object.
- Loitering: Tracking detected loitering object.
- Abandon/Absent: Tracking detected absent/abandon area.
- Zone: When zone event rising, tracking the area.
Menu for adjustment of video quality and DNR.
1) 2D-NR
: Adjust 2D-NR strength.
2) 3D-NR
: Adjust 3D-NR strength. Remove noise by summing several frames.
3) DNR Demo
: Represent DNR effect. Left side is none DNR screen,
Right side is DNR screen.
4) Color Enh(Color Enhance)
: Adjust of color strength.
1) Freeze
: When [ENTER] key pressed, still image will be output on the screen.
2) d-Effect
: Off/Rotation/Mirror/V Flip
3) Nega (Negative Picture)
: Inverse color effect.
4) DIS (Digital Image Stabilization)
: Compensation to image vibration.
Because of this function used d-ptz, screen magnification will be changed.
5) dPTZ Preset
: Configuration for dPTZ preset. It will be applied when menu exit.
- Zoom: Adjust magnification.
- Pan&Tilt: Adjust Pen/Tilt position.
- Up/Down: Adjust tilt position.
- Left/Right: Adjust pan position.
6) i-Freeze:
Select term of refresh rate for output video. This function is useful to reduce
the recording data storage. When motion is detected while i-Freeze, image is refresh to
live mode. So not only reducing the recording data but also not to miss object
movement.
- No Motion(s): Adjust Interval while no motion.
- Motion (0.1s): Adjust Interval while motion exists.
1) General
- Cam Info
: Display camera basic information.
NOTE:
* Cam ID/Baud rate/Protocol/Lens Type/CCD Type/Video System/Firmware Version
- System Lock: System locking by 4-characters PID (Lock/Unlock)
- Change PID: Change PID used in the system lock.
NOTE:
* Enter PID: Input previous password. Default PID is “0000”.
* Enter New PID: Input new password.
* Retype New PID: Confirm of new password.
- Title
: Change camera title. Max. 8-characters.
- Display
: Configurations for display camera ID&title.
Cam ID: Select camera ID display on/off.
Title: Select title display on/off.
Display Pos: Change position the string location.
- Language
: Change menu&OSD language.
2) Setup Tools
13