Revo REXN700-2 - Manual (Page 18)

LENS
The lens is not supplied with this camera. Purchase a lens suitable for your
requirements. These cameras accept both C-and CS-mount type lens.
1. Remove the cover from the iris lens plug supplied, and solder the lens cable to the
plug as shown below.
*) For using main functions it is recommended to use Auto Iris Lens with DC type.
If the lens is marked with fingerprints other marks, the image quality might be
poor.
*) It is recommended to use a high quality lens to improve the image quality
under low illumination.
● Video type:
Pin 1 --- Red (Power source)
Pin 2 --- N.C
Pin 3 --- White (Video signal)
Pin 4 --- Black (GND)
● DC type:
Pin 1 --- Damping-
Pin 2 --- Damping+
Pin 3 --- Drive+
Pin 4 --- Drive-
Pin 3
Pin 1
Rib
Connector
Pin 4
Pin 2
Connector
Cover
Heat
Shrinkable
Tubes
Automatic
Iris Lens
Iris Control
Cable
2. Remove the protective cap, and attach the lens to the camera by turning clockwise.
18