NOSHOK 800 Series Electronic Indicating Pressure Transmitter/Switch - Manual (Page 7)

= These steps are available
on switches configured with
the Enchanced Software
Option Only.
Function of the buttons:
S1 to run through the menu points,
to change the value
S2 to select menu point,
to return to the menu point
Enter the quick programming user
menu by pressing the buttons
S1 + S2 for less than 3s.
Select the unit.
Valid for all further settings.
Select the first switching point*
Select the first reset point*
Only for the version with two switching points!
Select the second switching point*
Only for the version with two switching points!
Select the second reset point*
The minimum pressure value stored is
deleted if the button S1 is pressed for
longer than 3s. The display flashes and
the actual pressure value is stored.*
The maximum pressure value stored is
deleted if the button S1 is pressed for
longer than 3s. The display flashes and
the actual pressure value is stored.*
Save the previous changes
YES: Save
NO: Not Save
Returns to the actual pressure indication
afterwards.
Return to the beginning of the user menu by pressing the button S1.
*The parameters which are marked with a *
can only be changed if the user is authorized in
the set-up menu (CO.En). Otherwise, there will
be only the display of the selected values in this
menu.
6
Q u i c k P r o g r a m m i n g - U s e r M e n u
6
= These steps are available
on switches configured with
the Enchanced Software
Option Only.
Function of the buttons:
S1 to run through the menu points,
to change the value
S2 to select menu point,
to return to the menu point
Enter the quick programming user
menu by pressing the buttons
S1 + S2 for less than 3s.
Select the unit.
Valid for all further settings.
Select the first switching point*
Select the first reset point*
Only for the version with two switching points!
Select the second switching point*
Only for the version with two switching points!
Select the second reset point*
The minimum pressure value stored is
deleted if the button S1 is pressed for
longer than 3s. The display flashes and
the actual pressure value is stored.*
The maximum pressure value stored is
deleted if the button S1 is pressed for
longer than 3s. The display flashes and
the actual pressure value is stored.*
Save the previous changes
YES: Save
NO: Not Save
Returns to the actual pressure indication
afterwards.
Return to the beginning of the user menu by pressing the button S1.
*The parameters which are marked with a *
can only be changed if the user is authorized in
the set-up menu (CO.En). Otherwise, there will
be only the display of the selected values in this
menu.
6
Q u i c k P r o g r a m m i n g - U s e r M e n u