Martel Electronics MC1210 - Manual (Page 3)

3
1. Introduction
The Martel MC1210 Multifunction Process Calibrator is a handheld, battery-operated
instrument that measures and sources electrical and physical parameters. The calibrator has
the following features and functions:
• A dual display. The upper display is used for the measurement of volts, current, and
pressure. The lower display can be used to measure volts, current, pressure, resistance
temperature detectors (RTDs), thermocouples, frequency, and resistance, and to source
pulse trains.
• A thermocouple (TC) input/output terminal with automatic reference-junction temperature
compensation
• Setpoints in each range for quickly increasing/decreasing output
• An interactive menu
• Complete serial interface for remote control
• Isolated read back for transmitter calibration
• Switchtest capability
1.1 Customer Service
Corporate Office:
www.martelcorp.com
e-mail: [email protected]
Tel: (603) 434-1433 800-821-0023 Fax: (603) 434-1653
Martel Electronics
3 Corporate Park Dr.
Derry, NH 03038
1.2 Standard Equipment
Check to see if your calibrator is complete. It should include:
MC1210 Calibrator, Instruction Manual, Test Leads, Rubber Boot, NIST Certificate