Taking the elect into operation, Taking.elect.into.operation.19, Elect – MAGURA TS6 User Manual
Page 19
19
t
aking
the
eleCt
intO
OperatiOn
Charging the eLECT rechargeable battery
L
L
Charge.your.eLECT.rechargeable.battery.before.taking.it.into.operation.
for.the.first.time.
.
Danger of accident due to improper accessories.
Î
–
When.charging.the.rechargeable.battery,.exclusively.use.intact.micro-
USB.cables/chargers.that.are.also.suitable.for.mobile.smartphones.
.
)
Remove.the.cover.on.the.“eLECT”.by.unscrewing.counter-clockwise.
.
)
Switch.off.the.eLECT.(OFF).
.
)
Connect.the.micro-USB.plug.to.the.charging.socket.
.
)
Connect.the.mains.adapter.to.the.mains.
О
О
LED.
.flashes.slowly.(1.s)
О
О
Rechargeable.battery.is.charged.(approx..3.h).
О
О
LED.
.lights.up.(——).
О
О
Rechargeable.battery.is.charged.
L
L
Your.eLECT.rechargeable.battery.is.protected.against.overcharging..
Avoid.unnecessary.electricity.consumption.by.disconnecting.the.mains.
adapter.and.micro-USB.cable.from.the.mains.after.charging.
.
)
Disconnect.the.micro-USB.plug.from.the.charging.socket.
О
О
LED.goes.out.
.
)
Switch.on.the.eLECT.(ON).
.
.
)
Replace.the.cover.on.the.“eLECT”.by.screwing.it.on.clockwise.
Installing the eLECT remote control
L
L
The.eLECT.remote.control.makes.it.possible.to.change.over.from.
.automatic.to.manual.mode..If.you.operate.the.eLECT.exclusively.in.
automatic.mode,.you.do.not.need.to.install.the.remote.control.
Danger of accident due to faulty installation work.
Î
–
Make.sure.that.the.eLECT.remote.control.cannot.interfere.with.brake.
and.gear.shift.actuation.and.function.in.any.lever.position.
There.are.2.attachment.options.for.the.eLECT.remote.control.
Î
–
Standard.clamp.
.–.for.fitting.next.to.the.brake.lever.
Î
–
Direct.fitting.–.exclusively.–.to.brake.levers.of.MAGURA.MT.Series.and.
rim.brakes.of.HS.Series.as.of.model.year.2011.
L
L
The.eLECT.remote.control.
.is.generally.mounted.on.the.right.–.how-
ever,.it.can.be.mounted.on.the.left.side.if.required.
.
)
Define.the.position.of.the.standard.clamp.on.the.handlebar.
О
О
Brake.and.gear.shift.actuation.and.function.are.not.allowed.to.be.
.impaired.by.the.eLECT.remote.control.
.
)
Place.the.rubber.half.shell.
.between.the.handlebar.and.the.remote.
control.
.
)
Tighten.the.clamping.screws.
.on.the.standard.clamp.with.a.tightening.
torque.of.
max. 1 N·m (9 lbf·in).
or:
.
)
Replace.the.sleeve.nuts.of.the.MAGURA.brake.lever.clip.
.with.
.adapter sleeve.nuts.
..Install.the.upper.adapter.sleeve.nut.with.a.
spacer.washer.
.
О
О
The.arrows.on.the.brake.lever.clip.always.point.upward.
.
)
First.tighten.the.top.then.the.bottom.adapter.sleeve.sleeve.nut.to.a.
tightening.torque.of.
max. 3 Nm (27 lbf·in).
.
)
Put.on.the.remote.control.
.
)
Tighten.the.clamping.screws.
.of.the.remote.control.to.a.tightening.
torque.of.
max. 0.5 Nm (5 lbf·in).
Synchronising the eLECT remote control
.
)
Press.and.hold.the.button.on.the.eLECT.unit.for.at.least.8.s.
.
О
О
LED.of.the.eLECT.unit.lights.up.(——).
.
)
Press.and.hold.the.button.on.the.remote.control.for.at.least.3.s.
О
О
LED.of.the.remote.control.lights.up.(——).
О
О
Synchronisation.is.performed.
О
О
LED.of.the.eLECT.unit.flashes.3×.quickly.(0.5.s).and..
LED.of.the.remote.control.flashes.6×.quickly.(0.5.s).green.
О
О
Synchronisation.is.completed.