Safety, Intended use, Basic safety instructions – MAGURA TS6 User Manual
Page 14: Afety, Intended.use basic.safety.instructions
14
THE PASSION PEOPLE
www.magura.com
S
af
ety
i
ntenDeD
use
Any use other than the intended use can lead to accidents that cause
serious or fatal injury.
MAGURA.TS8.and.TS6.suspension.forks.are.designed.and.intended.only
Î
–
for.installation.on.standard,.commercially.available.bicycles.designed.
according.to.the.dimension.of.the.suspension.fork.–.26",.650B.(27.5").
or.29".
Î
–
for.use.with.a.front.wheel.that.corresponds.to.the.dimension.of.the.
suspension.fork.–.26",.650B.(27.5").
or.29".
Î
–
for.the.specified.application.– see.
Î
–
for.the.maximum.permissible.total.weight.– see.
MAGURA.TS8.and.TS6.suspension.forks.provided.with.the.disk.brake.
bridge.in.the.dimension.postmount.7".are.designed.and.intended.only
Î
–
for.mounting.a.disc.brake.(Ø.180–210.mm).
Î
–
for.use.of.the.MAGURA.M15.thru.axle.and.a.front.wheel.hub.suitable.
for.this.
MAGURA.TS8.and.TS6.suspension.forks.provided.with.the.disk.brake.
bridge.in.the.dimension.postmount.6".are.designed.and.intended.only
Î
–
for.mounting.a.disc.brake.(Ø.160–210.mm).or.
for.mounting.a.V-brake.or.a.hydraulic.rim.brake.
Î
–
for.use.of.a.commercially.available.quick.release.skewer.(QR).and.a.
front.wheel.hub.suitable.for.this.(axle.diameter.9.mm).
MAGURA.suspension.forks.must.never.be.used.in.combination.with.front.
wheel.motors!
B
asiC
safety
instruCtiOns
Always.remember.that.riding.a.bicycle.entails.risk.both.for.the.rider.and.
other.road.users,.and.for.the.bicycle.and.its.components..Despite.the.use.
of.safety.gear.and.complete.safety.equipment,.accidents.that.cause.
.serious.or.fatal.injury.can.occur.
Always.use.your.common.sense.and.avoid.any.unreasonable.actions!
Installation & Maintenance
Danger of accident due to damaged suspension fork caused by incorrect
or impermissible installation work.
Î
–
Never.overestimate.your.technical.capabilities..Commission.a.bicycle.
workshop.or.an.authorized.MAGURA.service.centre.with.all.installation.
and..maintenance.work..This.is.the.only.way.to.ensure.that.work.is.
conducted.in.a.professional.manner.
Î
–
Never.make.changes.to.your.MAGURA.product.(e.g..tapping.thread.on.
the.steerer,.milling.the.disc.brake.bridge,.removing.the.hanger.on.the.
dropouts,.drilling,.painting,.opening.the.eLECT.unit,.etc.).
Î
–
Always.observe.all.min./max..values.stated.– see.
Î
–
For.assembly.steps.that.require.a.specific.tightening.torque.for.a.screw.
union,.always.use.a.torque.wrench.set.up.for.the.required.torque.
Î
–
Always.maintain.your.bicycle.in.technically.perfect.working.order.
Danger of accident due to improper accessories.
Î
–
Use.only.MAGURA.original.parts.and.lubricants.
Î
–
Never.install.mounting.clips,.luggage.carriers,.mudguards.or.similar.on.
your.MAGURA.suspension.fork..
If.needed,.fit.a.MAGURA.approved.mudguard.