2 steps for measurements, Insulation resistance measurement – KYORITSU 3128 User Manual
Page 27
KEW3128
23
KEW3128
6. Measurement
6.1.2 Steps for Measurements
Insulation Resistance Measurement
①
Check the voltage which can be applied to the circuit under test,
and set the Range Switch to any desired Voltage Range.
②
Select the “IR” (Insulation Resistance) on the Mode Selection
Screen, and press the ENTER Key.
The instrument gets started with the previously selected mode, and enters
into the stand-by mode.
③
Set a voltage value, and confirm it with the ENTER Key.
④
Confirmation Screen is displayed. Press the ENTER Key and
confirm the value.
See also other documents in the category KYORITSU Tools:
- 1009 (13 pages)
- 1011 (12 pages)
- 1012 (12 pages)
- 1018 (1 page)
- 1030 (1 page)
- 1061 (58 pages)
- 1051 (40 pages)
- 1109S (36 pages)
- 1110 (1 page)
- 2000 (1 page)
- 2002PA (27 pages)
- 2007A (1 page)
- 2009R (33 pages)
- 2012R (2 pages)
- 2017 (1 page)
- 2031 (1 page)
- 2033 (9 pages)
- 2040 (2 pages)
- 2046R (2 pages)
- 2200 (3 pages)
- 2210R (1 page)
- 2300R (1 page)
- 2413F (24 pages)
- 2413R (24 pages)
- 2431 (2 pages)
- 2432 (1 page)
- 2433R (1 page)
- 2434 (10 pages)
- 2500 (1 page)
- 2608A (2 pages)
- 3005A (24 pages)
- 3021 (24 pages)
- 3121A (12 pages)
- 3126 (28 pages)
- 3127 (60 pages)
- 3131A (20 pages)
- 3132A (20 pages)
- 3161A (24 pages)
- 3321A (24 pages)
- 4105A (10 pages)
- 4106 (48 pages)
- 4116A (20 pages)
- 4140 (32 pages)
- 4200 (24 pages)