KYORITSU 3127 - Manual (Page 12)

－ 9 －
● Current consumption (representative values at 12V of supply voltage)
Range 250V 500V 1000V 2500V 5000V VOLT
Output at
short-circuit
For 10 sec after a test is started : 700mA,
after that : 180mA
110mA
When rated
measuring current
is outputted
380mA
/0.25MΩ
440mA
/0.5MΩ
510mA
/1MΩ
670mA
/2.5MΩ
860mA
/5MΩ
Output at
open circuit
60mA 60mA 70mA 90mA 140mA
On stand-by 30mA
When backlight
is on
Increased by 30mA
Note) Current values in above table are all approximate values.
● Operating time: approx. 10 hours continuous
- under a load of 100MΩ at 5000V Insulation resistance range
● Accessories: Line probe: MODEL7165A
(Including MODEL8255 Straight type prod with molded parts)
Earth cord: MODEL7224A
Guard cord: MODEL7225A
Hard Case MODEL9171
Pickel Type Prod: MODEL8019
Straight Type Prod: MODEL8254
Instruction manual
Power Adapter
● Optional accessories: USB Communication set:MODEL8258
(USB adaptor(MODEL8212USB) with KEW Windows for
3127)
Adaptor for recorder:MODEL8302
Line probe with alligator clip:MODEL7168A
Long Line probe with alligator clip (15m): MODEL7253