KROHNE OPTIWAVE 5200C SIL - Manual (Page 30)

9
TECHNICAL DATA
30
OPTIWAVE 5200 C
www.krohne.com 02/2013 - 4001906202 - AD SIL OPTIWAVE 5200 R02 en
Design
Antenna options All basic antenna options
Interface languages English, German, French, Italian, Spanish, Portuguese, Japanese, Chinese
(Mandarin) and Russian
Accuracy
Resolution 1 mm / 0.04¨
Repeatability ±1 mm / ±0.04¨
Accuracy ±5 mm / ±0.2¨, when distance < 10 m / 33 ft;
±0.05% of measured distance, when distance > 10 m / 33 ft
Reference conditions acc. to EN 61298-1 Reference conditions acc. to EN 61298-1 Reference conditions acc. to EN 61298-1 Reference conditions acc. to EN 61298-1
Temperature +15...+25°C / +59...+77°F
Pressure 1013 mbara ±50 mbar / 14.69 psia ±0.73 psi
Relative air humidity 60% ±15%
Target Metal plate in an anechoic chamber (0...7 m / 0...23 ft)
Operating conditions
Temperature Temperature Temperature Temperature
Ambient temperature -40…+80°C / -40…+175°F (according to the temperature limits of the gasket
material. Refer to "Materials" in this table.)
Ex: see supplementary operating instructions or approval certificates
Pressure Pressure Pressure Pressure
Operating pressure PP Wave Horn antenna: PP Wave Horn antenna: PP Wave Horn antenna: PP Wave Horn antenna:
-1…16 barg / -14.5…232 psig.
For more data refer to "Technical Data / Pressure Ratings" in the handbook.
PTFE Wave Horn antenna: PTFE Wave Horn antenna: PTFE Wave Horn antenna: PTFE Wave Horn antenna:
-1…40 barg / -14.5…580 psig.
For more data refer to "Technical Data / Pressure Ratings" in the handbook.
Metallic Horn antenna / Wave Guide antenna: Metallic Horn antenna / Wave Guide antenna: Metallic Horn antenna / Wave Guide antenna: Metallic Horn antenna / Wave Guide antenna:
Standard: -1…40 barg / -14.5…580 psig;
subject to the process connection used and the flange temperature. Higher
pressure on request.
Other conditions Other conditions Other conditions Other conditions
Dielectric constant (ε
r
) Direct mode: ≥1.8
TBF mode: ≥1.1
Refer also to "Technical data: Antenna selection".
Material
Housing
(compact version only)
Standard: Aluminium with a polyester topcoat
Option: Stainless steel (1.4404 / 316L)
Wetted parts, including antenna PTFE Wave Horn antenna: PTFE
PP Wave Horn antenna: PP
Metallic Wave Horn and Wave Guide antennas: Stainless steel (1.4404 / 316L) and
PTFE - refer also to "Gaskets"
Process connection PP Wave Horn antenna: PP
PTFE Wave Horn antenna: Stainless steel (1.4404 / 316L) with a PTFE plate / lining
Metallic Horn antenna: Stainless steel (1.4404 / 316L); other materials on request
Wave Guide antenna: Stainless steel (1.4404 / 316L)