KROHNE OPTIFLUX 2070 EN - Manual (Page 22)

6
OPERATION
22
OPTIFLUX 2070
www.krohne.com 04/2008 • 4000243601
6.1 Display and operating elements
6.2 Menu of IFC 070 converter
• to enter the menu, hold the V and Z key for 5 seconds
i the display flashes
• press the Z key to enter the menu
i you see the menu number at the left (12 at the beginning) and the value at the right side of
the display
• scroll through the available positions with the V key to the position you want to change
• press the Z key to enter the value
i the value flashes
• use the Z and V key to change the value
• hold the Z key for 3 seconds to confirm the new value
• to leave the programming mode, hold the V key for 3 seconds to store the new value(s). If you
do not want to store the new values, do not touch any key for 60 seconds
other functions:
• display test: press Z key twice for 1 second
• software version: press Z key for 1 second
1 battery status
2 optical key V to navigate through the menu and to scroll through the measuring pages
3 reset button (only accessible with removed cover)
4 flow direction
5 measured value and measuring unit
6 optical key Z to navigate through the menu