KROHNE OPTIFLUX 2070 EN - Manual (Page 18)

4
ELECTRICAL CONNECTIONS
18
OPTIFLUX 2070
www.krohne.com 04/2008 • 4000243601
Electrical values
• Pulse output passive: Pulse output passive: Pulse output passive: Pulse output passive:
f ≤ 500 Hz; I ≤ 10 mA; U: 5...24 VDC (P ≤ 100 mW)
• Status output passive: Status output passive: Status output passive: Status output passive:
I ≤ 10 mA; U: 5...24 VDC (P ≤ 100 mW)
4.3 Signal cable
Figure 4-2: Terminal assignment
1 Status output 1
2 Status output 2
3 Not connected
4 Ground
5 Pulse output A
6 Pulse output B
CAUTION!
Always use the supplied KROHNE signal cable.
NOTE!
You only receive a signal cable if you ordered a remote version.