KROHNE OPTIMASS 6000 EN - Manual (Page 32)

6
TECHNICAL DATA
32
OPTIMASS 6000
www.krohne.com 07/2014 - 4001894003 - MA OPTIMASS 6000 R03 en
Maximum flow rates Maximum flow rates Maximum flow rates Maximum flow rates
All meters 150% of nominal flow rate
Ambient temperature Ambient temperature Ambient temperature Ambient temperature
Compact version with Aluminium
converter
-40...+65°C / -40…+149°F
Compact version with Stainless Steel
converter
-40...+55°C / -40…+131°F
Remote versions Standard temperature range: -40...+65°C / -40…+149°F
Cryogenic temperature range: -20...+65°C / -4…+149°F
Hazardous Area versions Refer to temperature limits
Process temperatures Process temperatures Process temperatures Process temperatures
Standard temperature range (flange connections)
Safe area -70…+230°C / -94…+446°F
Hazardous area -50…+230°C / -58…+446°F
High temperature range -50…+400°C / -58…+752°F
Cryogenic temperature range -200…+40°C / -328…+104°F
Standard temperature range (hygienic connections)
Safe area -70…+150°C / -94…+302°F
Hazardous area -50…+150°C / -58…+302°F
Nominal pressure at 20 Nominal pressure at 20 Nominal pressure at 20 Nominal pressure at 20°C / 68 C / 68 C / 68 C / 68°F F F F
Measuring tube Measuring tube Measuring tube Measuring tube SS 316 / 316L Hastelloy® C22 / S31803
FM / PED 97/23/EC -1…100 barg / -14.5…1450 psig -1…200 barg / -14.5…2900 psig
CRN / ASME B31.3 -1…100 barg / -14.5…1450 psig Pending
Outer casing burst pressure Outer casing burst pressure Outer casing burst pressure Outer casing burst pressure
08 ≈ 100 barg
10
15
25
50 ≈ 70 barg
80
100 ≈ 10 barg
150
200
250
If the process temperature is higher than 20°C / 68°F, the burst pressure will be lower. For more information please
contact the manufacturer.
Fluid properties Fluid properties Fluid properties Fluid properties
Permissible physical condition Liquids, gases, slurries
Permissible gas content (volume) Contact manufacturer for information.
Permissible solid content (volume) Contact manufacturer for information.
Protection category (acc. to EN 60529) IP 67, NEMA 4X
Installation conditions Installation conditions Installation conditions Installation conditions
Inlet / outlet runs None required
MA_OPTIMASS_6000_en_140717_4001894003_R03.book Page 32 Thursday, July 17, 2014 3:27 PM