KROHNE OPTIMASS 6000 EN - Manual (Page 22)

3
INSTALLATION
22
OPTIMASS 6000
www.krohne.com 07/2014 - 4001894003 - MA OPTIMASS 6000 R03 en
3.4.11 Heating and insulation
Insulation Insulation Insulation Insulation
The meter can be insulated to a maximum depth as shown (A). Do not insulate above this depth
as this will cause the electronics to overheat.
Factory fitted heating jacket Factory fitted heating jacket Factory fitted heating jacket Factory fitted heating jacket
If the meter has been ordered with a heating jacket, it will be supplied with DN15 PN40 to EN
1092-1 or 1/2¨ ASME150 flange connections.
Connecting / using the heating jacket
• Use rigid or reinforced flexible hoses to connect the heating jacket to the heat source.
• The heating jacket / loop material is SS316.
• Suitable heating mediums are steam or hot oil. Avoid the use of heating mediums that can
cause crevice corrosion in Stainless Steel.
Insulation
S08 S10 S15 S25 S50 S80 S100 S150 S200 S250
Dimension A [mm] 100 100 100 100 100 100 100 100 100 100
Dimension A [inches] 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9
Figure 3-1: The loop inside the heating jacket, carries the heating medium.
MA_OPTIMASS_6000_en_140717_4001894003_R03.book Page 22 Thursday, July 17, 2014 3:27 PM