Technical data – KROHNE OPTIMASS 2000 EN User Manual
Page 34
6
TECHNICAL DATA
34
OPTIMASS 2000
www.krohne.com
10/2010 - 4000810002- MA OPTIMASS 2000 R02 en
Effect on sensor zero point caused by a shift in process pressure
Effect on sensor zero point caused by a shift in process pressure
Effect on sensor zero point caused by a shift in process pressure
Effect on sensor zero point caused by a shift in process pressure
Stainless Steel
0.0002% of the max flow rate per 1 bar
rel
. / 0.0000014% of the max flow rate
per 1 psig
Fluid properties
Fluid properties
Fluid properties
Fluid properties
Permissible physical condition
Liquids, gases, slurries
Permissible gas content (volume)
Contact manufacturer for information.
Permissible solid content (volume)
Contact manufacturer for information.
Protection category (acc. to EN 60529)
IP 67, NEMA 4X
Installation conditions
Inlet runs
None required
Outlet runs
None required
Materials
Measuring tube
Stainless Steel UNS S31803 (1.4462)
Optional UNS S32750 (1.4410)
Spigot
Stainless Steel UNS J92205 (1.4470)
Optional UNS J93404 (1.4469)
Flanges
Stainless Steel AISI 316 / 316L (1.4401 / 1.4404) dual certified
Optional Stainless Steel UNS S31803 (1.4462) (NACE approved)
Optional UNS S32750 (1.4410) (NACE approved)
Outer cylinder
Stainless Steel AISI 304 / 304L (1.4301 / 1.4307) dual certified
Optional Stainless Steel AISI 316 / 316L (1.4401 / 1.4404) dual certified
Optional Stainless Steel UNS S31803 (1.4462)
1
Heating jacket version
Heating jacket version
Heating jacket version
Heating jacket version
Heating jacket
Stainless Steel 316L (1.4404)
Note: the outer cylinder is in contact with the heating medium
All versions
All versions
All versions
All versions
Sensor electronics housing
Stainless Steel 316L (1.4409)
Optional Stainless Steel 316 (1.4469)
Junction box (remote version)
Die cast Aluminium (polyurethane coating)
Process connections
Flange
Flange
Flange
Flange
DIN
DN100…300 / PN16…160
ASME
4...12" / ASME 150…1500
JIS
100A / 10...20K
Hygienic
Hygienic
Hygienic
Hygienic
Tri-clover
4"
Tri-clamp DIN 32676
DN100
Tri-clamp ISO 2852
4"
DIN 11864-2 Form A
DN100
Male thread DIN 11851
DN100
Male thread SMS
4"
Male thread IDF / ISS
4"
Male thread RJT
4"
MA_OPTIMASS2000_en_101022_4000810002_R02.book Page 34 Monday, November 22, 2010 5:47 PM