KROHNE IFC 010 Converter Short EN - Manual (Page 7)

IFC 010 7
1.3.5 Connection diagrams I
and II (power supply, converter
and flow sensor)
The figures in brackets indicate the stranded drain wires for the shields, as shown in cross-sectional drawing of
signal cable.
Electrical connection to VDE 0100 “Regulations governing heavy-current installations with line voltages up to
1000 V” or equivalent national regulations.
Power supply 24 V AC / DC: functional extra-low voltage with protective separation in conformity with
VDE 0100, Part 410 or equivalent national regulations.
FE = functional ground conductor
I Process temperature < 150°C / 302°F II Process temperature > 150°C / 302°F
IFC 010 W IFC 010 W
Flow sensors
Flow sensors
DS DS
CB