KROHNE IFC 010 Converter Short EN User Manual
Page 19
IFC
010
19
Return a device for testing or repair to KROHNE
This device has been carefully manufactured and tested. If installed and
operated in accordance with these operating instructions, it will rarely
present any problems. Should you nevertheless need to return a device for
inspection or repair, please pay strict attention to the following points:
Due to statutory regulations on environmental protection and safeguarding
the health and safety of our personnel, KROHNE may only handle, test and
repair returned devices that have been in contact with products without risk
to personnel and environment.
This means that KROHNE can only service this device if it is accompanied
by the following certificate confirming that the device is safe to handle.
If the device has been operated with toxic, caustic, flammable or water-
endangering products, you are kindly requested:
• to check and ensure, if necessary by rinsing or neutralizing, that all
cavities are free from such dangerous substances,
• to enclose a certificate with the device confirming that is safe to handle
and stating the product used.
We cannot service this device unless accompanied by such a certificate.
S P E C I M E N certificate
Company: ………………………………………………………………………... Address: ………………………………………………………………………………
Department: ……………………………………………………………………... Name: …………………………………………………………………………………
Tel. No.: ………………………………………………………………………….. Fax No.: ………………………………………………………………………………
The enclosed device
Type: …………………………………………………………………………………………………………………………………………………………………………….
KROHNE Order No. or Series No.: ………………………………………………………………………………………………………………………………………….
has been operated with the following liquid: ………………………………………………………………………………………………………………………………..
Because this liquid is
water-hazardous toxic caustic flammable
we have
checked that all cavities in the instrument are free from such substances /
flushed out and neutralized all cavities in the device
We confirm that there is no risk to humans or environment through any residual liquid contained in this device.
Date: …………………………………… Signature: ………………………………………………………………………………
Company stamp: