KROHNE PTITEMP TT 20 C EN - Manual (Page 9)

DEVICE DESCRIPTION
2
9
OPTITEMP TT 20
www.krohne.com 10/2011 - 4000753102 - MA OPTITEMP TT 20 R02 en
Device description
2.1 Scope of delivery
The scope of delivery always consists of the transmitter and its documentation.
2.2 Device description
The transmitter will indicate sensor break according to selected value high (> 21.0 mA) or low
(< 3.6 mA). Short circuit will always be indicated as low output (< 3.6 mA).
The transmitter is designed for installation in a B connection head according to DIN 43729. With
an installation kit the transmitter can be installed on a top-hat rail according to DIN EN 50022.
The transmitters are configured from a PC by using the ConSoft program and a transmitter
configuration kit ICON. When transmitters are configured from PC no calibration is necessary.
The PC configuration software ConSoft is used for configuration, display and documentation. The
current ConSoft version is available for downloading on our website.
You can find configuration instructions in the ConSoft reference manual.
ConSoft is compatible with Windows 2000, Windows XP, Windows Vista and Windows 7.
INFORMATION!
Inspect the cartons carefully for damages or signs of rough handling. Report damage to the
carrier and to the local office of the manufacturer.
INFORMATION!
Do a check of the packing list to make sure that you have all the elements given in the order.
INFORMATION!
Look at the device nameplate to ensure that the device is delivered according to your order.
.book Page 9 Friday, October 14, 2011 11:22 AM