KROHNE PTITEMP TT 20 C EN - Manual (Page 5)

SAFETY INSTRUCTIONS
1
5
OPTITEMP TT 20
www.krohne.com 10/2011 - 4000753102 - MA OPTITEMP TT 20 R02 en
Safety instructions
1.1 Intended use
The transmitter is an analog two-wire non-isolating PC configured transmitter designed for
Pt100 temperature sensors and intended to be used in an industrial environment.
The transmitter is intended for installation in a B connection head or larger according to
DIN 43729. It's designed for a three wire sensor connection.
The transmitters are configured from a PC by using the ConSoft program and a transmitter
configuration kit (USB connection) ICON without external power supply. Calibration of the
transmitter, after the PC configuration is not necessary.
1.2 Certifications
The device fulfils all applicable statutory requirements of the following EC directives:
• CE Directive 93/68/EEC
• EMC Directive 2004/108/EC according harmonized standard EN 61326-1:2006 including A1
and A2
The manufacturer certifies successful testing of the product by applying the CE marking.
CE marking
.book Page 5 Friday, October 14, 2011 11:22 AM