KROHNE OPTITEMP TR 100-TC 100 EN - Manual (Page 32)

8
APPENDIX
32
OPTITEMP TR/TC 100
www.krohne.com 10/2009 - 4000630002 - MA OPTITEMP TR/TC 100 R02 en
Appendix
8.1 Technical legislation in effect
8.2 TR 100 and TC 100 type codes
The characters of the type code highlighted in light grey describe the standard.
VDE/VDI 3511 Technical temperature measurement.
VDE/VDI 3522 Response time of contact thermometers.
DIN 43735 Electrical temperature sensor for resistance thermometers and thermocouples.
DIN EN 60584-1 Thermocouples, Part 1: Basic values of thermoelectric voltage.
DIN EN 60584-2 Thermocouples, Part 2: Tolerances of thermoelectric voltages.
DIN EN 60751 Industrial platinum resistance thermometers and platinum RTDs.
VGC0 4 Type Type Type Type
C TC 100: Thermocouple measuring insert
R TR 100: Pt100 resistance thermometer measuring insert
Approval Approval Approval Approval
0 without
1 ATEX - Ex (pending)
Measuring insert diameter Measuring insert diameter Measuring insert diameter Measuring insert diameter
3 3 mm / 0.118"
6 6 mm / 0.236"
Sensor / connection configuration Sensor / connection configuration Sensor / connection configuration Sensor / connection configuration
1 1 x Pt100, 2-wire connection (only tolerance class B)
2 1 x Pt100, 3-wire connection
3 1 x Pt100, 4-wire connection
4 2 x Pt100, 3-wire connection
5 2 x Pt100, 4-wire connection
6 2 x Pt100, 2-wire connection
8 1 x Pt100, 3-wire connection + SmartSense (only Ø 6 mm / 0.236")
A 1 x thermocouple type J (Fe-CuNi)
B 1 x thermocouple type K (NiCr-Ni)
D 2 x thermocouple type J (Fe-CuNi)
E 2 x thermocouple type K (NiCr-Ni)
Measuring insert / class Measuring insert / class Measuring insert / class Measuring insert / class
1 Tolerance class B, mineral insulated (Mi), thin film (TF), -70...+500°C / -94...+932°F
2 Tolerance class A, mineral insulated (Mi), thin film (TF), -50...+300°C / -58...+572°F
3 Tolerance class B, shock-resistant, mineral insulated (Mi), thin film (TF),
-50...+600°C / -58...+1112°F
4 Tolerance class A, mineral insulated (Mi), wire-wound (WW), -200...+600°C /
-328...+1112°F
5 Mineral insulated (Mi), thin film (TF), tolerance class 1/3 DIN B at -50...+150°C /
-58...+302°F, over and above tolerance class A, thin film (TF), -50...+300°C /
-58...+572°F
A Tolerance class 1
VGC0 VGC0 VGC0 VGC0 4444 Continued on next page
.book Page 32 Thursday, October 8, 2009 10:26 AM