KROHNE OPTITEMP TR 100-TC 100 EN - Manual (Page 28)

7
TECHNICAL DATA
28
OPTITEMP TR/TC 100
www.krohne.com 10/2009 - 4000630002 - MA OPTITEMP TR/TC 100 R02 en
7.3.2 Measuring insert with type J thermocouples
Type J: basic values and tolerances
Temperature
(T90) in °C / °F
Basic value
in mV
Thermal EMF
in mV/K
Tolerances acc. to DIN EN 60584-2
Class 1 Class 2
mV ° C / °F mV ° C / °F
-40 / -40 -1.961 0.046 ± 0.07 ± 1.5 / 2.7 ± 0.12 ± 2.5 / 4.5
0 / +32 0 0.053 ± 0.08 ± 1.5 / 2.7 ± 0.13 ± 2.5 / 4.5
+100 / +212 5.269 0.055 ± 0.08 ± 1.5 / 2.7 ± 0.14 ± 2.5 / 4.5
+200 / +392 10.779 0.055 ± 0.08 ± 1.5 / 2.7 ± 0.14 ± 2.5 / 4.5
+300 / +572 16.327 0.055 ± 0.08 ± 1.5 / 2.7 ± 0.14 ± 2.5 / 4.5
+400 / +752 21.848 0.055 ± 0.09 ± 1.6 / 2.9 ± 0.17 ± 3.0 / 5.4
+500 / +932 27.393 0.057 ± 0.11 ± 2.0 / 3.6 ± 0.21 ± 3.8 / 6.8
+600 / +1112 33.102 0.056 ± 0.13 ± 2.4 / 4.3 ± 0.25 ± 4.5 / 8.1
+700 / +1292 39.132 0.064 ± 0.18 ± 2.8 / 5.0 ± 0.34 ± 5.3 / 9.5
+750 / +1382 42.281 0.064 ± 0.19 ± 3.0 / 5.4 ± 0.36 ± 5.6 / 10.1
Figure 7-4: Type J tolerances
1 Tolerances in °C
2 Tolerances in °F
3 Tolerance class 2
4 Tolerance class 1
5 Temperature in °C
6 Temperature in °F
.book Page 28 Thursday, October 8, 2009 10:26 AM