KROHNE OPTIWAVE 7300C Quickstart EN - Manual (Page 8)

2
INSTALLATION
8
OPTIWAVE 7300 C
www.krohne.com 03/2014 - 4000050005 - QS OPTIWAVE 7300 R08 en
2.5 Transport
2.6 Pre-installation requirements
• Make sure that there is sufficient space on all sides.
• Protect the signal converter from direct sunlight. If necessary, install the weather protection
accessory.
• Do not subject the signal converter to heavy vibrations. The devices are tested for vibration
and agree with EN 50178 and IEC 60068-2-6.
Figure 2-7: How to lift the device
1 Remove the converter before you lift the device with a hoist.
WARNING!
Lift the device carefully to prevent damage to the antenna.
INFORMATION!
Obey the precautions that follow to make sure that the device is correctly installed.