KROHNE OPTIWAVE 7300C Quickstart EN - Manual (Page 16)

2
INSTALLATION
16
OPTIWAVE 7300 C
www.krohne.com 03/2014 - 4000050005 - QS OPTIWAVE 7300 R08 en
Tri-Clamp
®
Equipment needed:
• Device
• Gasket (not supplied)
• Band clamp (not supplied)
• Make sure that the tank connection is level.
• Make sure that you use the applicable gasket for the connection dimensions and the process.
• Align the gasket correctly.
• Lower the antenna carefully into the tank.
• Attach the band clamp to the process connection.
• Tighten the band clamp.
DIN 11851
Equipment needed:
• Device
• Gasket (not supplied)
• DIN 11851 nut
Figure 2-18: Tri-Clamp ® connection
1 Tank socket
2 Band clamp
Figure 2-19: DIN 11851 connection
1 Tank socket
2 Nut for DIN 11851 connection