KROHNE IFC 300 Converter HART 0102 - Manual (Page 7)

Supplementary Installation and Operating Instructions IFC 300 HART
HC275, FC375, AMS, PDM, FDT DTM
5 Process Device Manager (PDM)
5.1 Installation
If the IFC 300 Device Description is not already installed on the PDM System a so called Device Install IFC 300
HART PDM is needed (available as download from KROHNE ‘Download Centre’ on the internet or on floppy disk /
CD-ROM from KROHNE).
For installing the DD on PDM V 5.2 refer to the “PDM Manual” section 11.2:”Device Install / Integrating Devices in
SIMATIC PDM with 'Device Install'".
For installing the DD on PDM V 6.0 refer to the “PDM Manual” section 13:”Integrating Devices”.
Please read also the “readme.txt”, which is also contained in the Device Install.
5.2 Operating
Refer to the IFC 300 Menu Tree PDM (Attachment C).
Due to PDM requirements and conventions the IFC 300 operation differs to some extent from operation with HC275 /
FC375 and via local keypad. Furthermore parameters of the device's "service" menu are not supported and
simulation is possible only for current outputs. The online help of each parameter contains its function number as a
reference to the device’s local display and the “Handbook”.
Parameter protection for custody transfer is the same as on the device's local display. Other specific protection
mechanisms like "password quick setup" and "password setup" are not supported via HART.
6 Field Device Tool Device Type Manager (FDT DTM)
6.1 Installation
If the IFC 300 Device Type Manager is not already installed on the Field Device Tool container a setup is needed
(available as download from KROHNE ‘Download Centre’ on the internet or on CD-ROM from KROHNE).
For installing the DTM with the setup refer to the setup’s accompanying documentation.
6.2 Operating
The IFC 300 operation via DTM is made quite close to the manual instrument control via keypad. Refer to the
device’s local display and the “Handbook”.
KROHNE Messtechnik GmbH & Co. KG · Ludwig-Krohne-Str. 5 ‚ D-47058 Duisburg 7/20
Tel.: 0203-301 0 ‚ Fax: 0203-301 389 · e-mail: [email protected]