End of day, Weekly – Alliance Laundry Systems F232201R4 User Manual

Page 28

Maintenance

F232201

End of Day

1. Clean the AC drive filter:

a. Snap off the external plastic cover which

contains the filter.

b. Remove the foam filter from the cover.

c. Wash the filter with warm water and allow to

air dry. Filter can be vacuumed clean.

2. Clean the door gasket of residual detergent and

all foreign matter.

3. Clean automatic supply dispenser and lid inside

and out with mild detergent. Rinse with clean
water.

4. Clean powder dispenser and lid with mild

detergent. Rinse with clean water.

5. Clean washer’s top, front, and side panels with

mild detergent. Rinse with clean water.

6. Leave loading door open at the end of each day to

allow moisture to evaporate.

7. If the washer-extractor is equipped with the

Premium Wet Clean Module, clean the water
recirculation filter, located in the canister, of all
debris.

NOTE: Unload the washer-extractor promptly
after each completed cycle to prevent moisture
buildup. Leave loading door open at the end of
each completed cycle to allow moisture to
evaporate.

Weekly

1. Check the washer-extractor for leaks.

a. Start an unloaded cycle to fill the washer-

extractor.

b. Verify that door and door gasket do not leak.

c. Verify that the drain valve is operating and

that the drain system is free from obstruction.
If water does not leak out during the prewash
segment, drain valve is closed and functioning
properly.