Introduction, Model identification, Nameplate location – Alliance Laundry Systems F232201R4 User Manual
Page 11: Replacement parts, Customer service
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
9
F232201
Introduction
Model Identification
Information in this manual is applicable to these
models:
* This manual applies to models with U5, U6, U7 or U8 in the
8th and 9th, or 9th and 10th positions in the model number
(e.g., UW60PVXU80001).
Nameplate Location
The nameplate is located on cagewrap, on side of AC
Inverter Drive Compartment and on Electric Heat
Contractor Box (if equipped). Always provide the
machine’s serial number and model number when
ordering parts or when seeking technical assistance.
Refer to Figure 1.
Figure 1
Replacement Parts
If literature or replacement parts are required, contact
the source from which the washer-extractor was
purchased or contact Alliance Laundry Systems LLC
at (920) 748-3950 for the name of the nearest
authorized parts distributor. A parts manual may be
ordered by returning the reply card provided with each
washer-extractor.
Customer Service
For technical assistance, contact your local distributor
or call:
(920) 748-3121
Ripon, Wisconsin
A record of each washer-extractor is on file with the
manufacturer. Always provide the machine’s serial
number and model number when ordering parts or
when seeking technical assistance. Refer to Figure 1.
UW35PV*
UW100PV*
UW60PV*
UW125PV*
UW80PV*
UW150PV*
PHM618N
1
Near Supply Valves on Cagewrap
2
Below Inverter Exhaust Fan on Electric Heat
Box (if equipped)
3
Side of AC Drive Compartment
PHM618N
P
U
S
H
1
2
3
EXAMPLE OF MACHINE NAMEPLATE LOCATION