Alliance Laundry Systems F232201R4 - Manual (Page 19)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
17 F232201
Operational Keypad
The control includes sixteen keypads. Refer to
Figure 6. These functions are available to the operator
and are intended to control operation of the washer-
extractor. Refer to Table 2.
* If cycle in a spin coast delay, display shows speed of basket.
Operational Keypad
Keypad Description
Numbers 0–9 Press to select cycle number.
Display Temp* Press and hold. Display will show and update sump temperature in degrees Fahrenheit or Centigrade.
Advance Press to cause computer to skip to the next step in the cycle. The computer will not advance past drain
step. (The Advance keypad is enabled at the factory and can be disabled at the laundry site.)
Stop Press to immediately abort the cycle and initiate the Stop Routine.
Start Press to start selected cycle or to restart a step following a “FILL” or “EMTY” alarm. See Error
Recovery Routine in this section of the manual.
Manual See Manual Mode Control Feature at the end of this section.
Table 2