KANOMAX 3900 Portable Particle Counter - Manual (Page 71)

3. Display Description and Operation Procedure 64
3.10.5 SYSTEM
In the SYSTEM setting, configure the following settings:
- DATE/TIME
- LCD
- SOUND
- COMMUNICATION
- LOCALE
- ABOUT (System Information)
· DATE/TIME
DATE/TIME setting;
To adjust DATE, tap [▼] to display a calendar and set the date.
To change the TIME, tap “hour”, “minute” and “second”
using [▲/▼] buttons.
Tap [OK] to activate the settings (Authentication required).
· LCD
In LCD setting, configure Power saver time-out and
Brightness setting.
For Power saver time-out setting, select one among
1min, 2min, 5min, 10min, 15min, and 30min.
To configure the brightness setting, move the slider
from side to side.
Tap [OK] to activate the settings (Authentication
required).