KANOMAX 3900 Portable Particle Counter - Manual (Page 37)

3. Display Description and Operation Procedure 30
- When using MAP (Refer to 3.7 CONFIG for using a MAP.)
In STANDARD measurement tap [START] to
display MAP.
A measurement will start based on the setting
configured in 3.5 MODE and 3.7 CONFIG.
Select a measurement point and tap [START].
Tap [STOP] to stop a measurement.
Tap [ZOOM] to enlarge a MAP.
(This button will become [NORMAL] button. Press
[NORMAL] to display an entire MAP when a map
is enlarged.)
When a MAP is enlarged, [SCROLL UP], [SCROLL
DOWN], [SCROLL LEFT] and [SCROLL RIGHT]
buttons are activated, which enables you to move
MAP.