KANOMAX 6710 TABmaster Capture Hood User Manual - Manual (Page 26)

19
5.3 Data processing settings
¾ Under “MENU” select option 3 “Record Processing”.
¾ Press to select “Record Processing”. Press
to return to the main interface.
¾ Press or to select option 1 or 2.
¾ Press to select a setting to change, or press to
quit.
The “±” means wind direction of air flow in “Display”.
¾ Press to select an ID or Cycle No. as below.
¾ Press or to set an ID or Cycle No.
¾ Press to quit.
¾ The settings in “Delete” includes: Delete All, Delete IDs,
Delete Cycles.
ID Cycle
MOVE
OK
BACK
1. Delete All
2. Delete IDs
3. Delete Cycles SET
Detele
No
Select ID： 05
No
Select ID ：12
Select Cycle： 000 No
1
Under option 1, press .
Under option 2, press .
ADJ
OK
BACK
Max：
Min：
Avg：
Flow：
T:
H:
SET
0 m3/h
0 m3/h
0 m3/h
Time：
Cycle：001
0 m3/h
25.4 ℃
53.4 %RH
2012 / 06 / 01
13 : 15 : 08
Test ID：01 Total：30
Total：100
01
MOVE
OK
EXIT
MENU
2. General Settings
3. Record Processing
4. Communication
5. Print
SET
1.Test Setting
3
MOVE
OK
BACK
Record Processing
2. Delete
SET
1.Display
1