KANOMAX 6710 TABmaster Capture Hood User Manual - Manual (Page 21)

14
5.1.1 Test ID setting
A Test ID consists of a group of Cycles (or Samples). A Test ID can contain up to 100 Cycles.
The maximum number of Test IDs is 30. Any new Sample will be saved to the current Test ID. You
can change the current Test ID at any time to keep your data organized. Press to return to the
“MENU” and the settings will not be saved. Refer to the figures as below:
¾ Under “Test Settings”, press or to choose option
item 1 “Test ID”.
¾ Press to change the “Test ID” setting.
¾ Press or to select a menu item.
¾ Press to enter a setting.
.
¾ Press or to increase or decrease the Test ID No.
¾ Press for save your changes，or press to quit.
¾ Press or change the settings.
¾ Press to save your changes, or press to quit.
.
Under option 2, press .
MOVE
OK
BACK
Test ID
2. Add New ID
1. Select ID
Total ID：
SET
20
No
30
Yes
ADJ
OK
BACK
Test ID
2. Add New ID
1. Select ID
Total ID：
SET
No
20
30
Under option 1, press .
MOVE
OK
BACK
Test ID
2. Add New ID
1. Select ID
Total ID：
SET
20
No
30
1
MOVE
OK
BACK
Test Settings
1. Test ID
2. Test Mode
3. Unit
4. Act.Std
SET
Std
1
Single