KANOMAX 3522 Piezobalace Dust Monitor - Manual (Page 7)

2
1.2 LCD Screen
a. Date & Time:
Indicates current date & time.
b. Sampling Time:
Sampling time can be quick set to either 24s, 120s or custom set from 1-60 min.
c. Data Record:
Indicates the current number of data records (Max.500). When a measurement is complete,
“STORE” will flash here. To save the data, press [MEMORY].
d. Measurable Range:
The remaining measurable range is indicated by a bar indicator, which moves from left to
right as the sensor absorbs dust and the range decreases. When the sampled dust exceeds
approx. 10 µg
(>Fundamental Frequency + 2000 Hz), “CLEANING” will flash here. The
cleaning procedure must be performed when the remaining measurable range is too small or
if “CLEANING” flashes.
e. Concentration Reading:
The concentration reading flashes during a measuring.
f. Operating Status:
“WAIT” flashes during cleaning and power-up.
“READY” flashes when high voltage is supplied and the instrument is ready for a
measurement.
The remaining sampling time is displayed during a measurement. The indicator bar
increases from left to right as time elapses.
g. High Voltage Indicator:
The high voltage status indicator displays when high voltage is being supplied. When the
pointer moves to the center of the frame (under the black block), the operating status
changes to “READY”, and the instrument is ready to perform a measurement.
h. Battery Indicator:
Indicates remaining battery power.
1.3 Operation Keys
Menu key
MENU
MEAS
CLN
MEMORY START
Up key
Set key
Start key
Down key
Supply or cut high
voltage power key
Data storage key
SET
c a b
d
g e f h