KANOMAX 3522 Piezobalace Dust Monitor - Manual (Page 21)

16
it is recommended that you set the time for approx. 30-60
seconds ahead of the actual time, and then confirm the
setting by pressing [SET] on “3.SAVE INFO” when the set
time matches the actual time.
6.5 Communications Menu
To set the communications baud rate
Move the cursor to item “7.COMMUNICATION” of the main menu by using △ and ▽ ,
and press [SET]. The screen shown below will be displayed.
Select “1” by using △ and ▽ .
(The factory default setting is 9600.)
The baud rate can be changed by using △ and ▽ .
The setting changes as shown below:
19200 9600 4800
When [SET] is pressed, the cursor will return to the
“1.BAUDRATE”. To confirm the baud rate settings,
select “2.SAVE INFO”, and press [SET]. (If you do not
confirm the settings by pressing [SET], the baud rate will
not change.)
Select “1.BAUDRATE” and press SET