Jenway 6285 - Manual (Page 33)

Section 13
Maintenance & Troubleshooting
8.1 General
The 6
2
Series Fluorimeters are designed to give optimum performance with minimum
maintenance. It is only necessary to keep the external surfaces clean and free from
dust. The sample area should always be kept clean and any accidental spillage
should be wiped away immediately.
To give added protection when not in use, the unit should be disconnected from the
mains supply and covered with the optional dust cover (630 028).
For longer-term storage or re-shipment it is recommended that the unit be returned to
the original packing case.
8.2 Xenon Lamp Replacement
In the highly unlikely event of lamp failure it will be necessary to contact your local
distributor or service agent for assistance. There are no serviceable parts within this
product. Under no circumstances should any attempt be made to effect repair as this
will invalidate the product Warranty.
(30)