Jenway 6285 User Manual
Page 20
4. Use the down arrow key to select DATE FORMAT. Press the up or down
arrow keys to view the two alternative date formats. Press the enter key to
confirm your choice. The previously set date will automatically change with
your selection in this menu option.
5. To exit the INSTRUMENT SETUP use the up or down arrow keys to highlight
EXIT
, then press the enter key. To set additional parameters continue as
detailed in the following text.
Operator ID
OPERATOR ID
is a 3-digit code that can be quickly and easily entered from the
INSTRUMENT SETUP
menu. This ID will appear in the header of all results printed
or down loaded from the fluorimeter, identifying the operator that carried out the
analysis. When using this facility all potential users should be allocated individual 3
digit codes.
Operators should enter their code using the following procedure:
1. Use the up or down arrow keys to select OPERATOR ID from the
INSTRUMENT SETUP
menu, then press the enter key.
2. Use the right or left arrow keys to highlight each digit in turn. Use the up or
down
arrow keys for adjustment until the new operator ID is set.
3. Confirm the operator ID by pressing the enter key. This current ID will be
used in the header of all result printouts and results data transferred to a PC
or other serial device.
4. To exit the INSTRUMENT SETUP menu use the up or down arrow keys to
highlight EXIT, then press the enter key. This will return you to the main
menu.
(17)