Jenway 6285 User Manual
Page 13
Section 4
Instrument Menu Options
In this section a brief explanation is given for the main menu options available. These
will be covered in greater depth in the sections appropriate to their usage.
Measure Screen
METHOD NAME
- user set current method name or DEFAULT METHOD
LAST READING
- result from last read or --.---
UNITS OF MEASURE
- as set in MEASURE SETUP menu
SYSTEM GAIN%
- 0 to100% as set up in MEASURE SETUP menu. Note: This
option is not available on the Model 6270.
CALIBRATION REMINDER
(flashing) - user alert indicating that a calibration is due
TIMED READING COUNTDOWN
- number of seconds until the next auto read is
performed
READ
– allows the user to take a reading of sample/standard currently in the sample
chamber
SAVE
– allows the user to save the last reading to instrument memory
To exit this menu highlight EXIT using the right and left arrow keys and press enter to
confirm. This will return you to the main menu options.
Measure Setup menu
Enter MEASURE SETUP menu by selecting SETUP from the MAIN menu. The
following screen will be shown:
EXIT
– allows user to return to the previous menu
METHOD ID
– used to index individual methods. (0 to 19)
(10)