In-Situ smarTROLL Multiparameter Handheld Low-Flow Kits & Accessories - Manual (Page 2)

Instruction Sheet
7. Calibrate the instrument as shown in the Operator's
Manual and in the mobile Help.
8. Remove the restrictor from the instrument. Twist the
instrument onto the flow cell tight enough to attach it,
but do not over tighten.
9. Follow the directions in the manual or the mobile Help
to perform the Low-Flow test.
General Specifications
Flow Cell
Dimensions 6.4 cm (2.5 in.) O.D., 15.2
cm (6 in.) length
Flow Cell Volume 125 mL without sensors
Flow Cell Materials
Clear polished
polycarbonate
Ground Spike 316L stainless steel
Base plate 12" x 12" PVC
NPT fittings
3/8" to 1/4" or 3/8' to 3/8'
NPT
Tubing size
compatibility
3/8", 1/4"
Typical flow rate 0.1 - 0.5 liters per minute
Recommended
operational limits Flow rate: 8.0 liters per
minute, Pressure: 30 psi
2