In-Situ USB Port TROLL Com (Direct Connect) - Manual (Page 2)

Information is subject to change without notice. In-Situ and the In-Situ logo, Win-Situ, TROLL, BaroTROLL, RuggedReader, RuggedCable, and RDO are
trademarks or registered trademarks of In-Situ Inc. Viton is a registered trademark of DuPont Dow Elastomers. Delrin is a registered trademark of E. I.
DuPont de Nemours and Company. Microsoft, Windows, and Windows Vista are trademarks or registered trademarks of Microsoft Corporation Copyright
© 2007, 2009 by In-Situ Inc. All rights reserved.
Level TROLL ® / Aqua TROLL ® / MP TROLL ® 9500
1 800 446 7488
(toll-free, US and Canada) or 970 498 1500
www.in-situ.com
0052512 rev. 002 01/09
CAUTION: DO NOT EXCEED 16V EXTERNAL
POWER FOR AN MP TROLL 9500. Use a con-
verter that supplies 16V or less.
Level TROLL
MP TROLL 9500
Aqua TROLL
inSTALLATiOn—USB SOfTwARe
1. Install the latest Win-Situ
® software from the In-Situ CD or web-
site to a desktop/laptop computer running Microsoft Windows
2000 or higher.
• Win-Situ 5, version 5.6 or higher for a Level TROLL or
Aqua TROLL,
• Win-Situ 4, version 4.57.4 or higher for a Multi-Parameter
TROLL 9500
When asked, select the option "Install USB TROLL Com Drivers."
Two drivers will be loaded to your hard drive, one for the USB
TROLL Com, one for the USB TROLL Com serial port.
TIP: Be sure to install USB TROLL Com drivers when
installing Win-Situ.
2. After installation, plug the USB TROLL Com into a USB port on your
computer.
• Windows 2000, Windows Vista: When new hardware is
detected, the drivers are installed automatically.
• Windows XP: Follow the instructions in the Found New
Hardware Wizard. Select the option "Install software auto-
matically."
3. After installation, check as follows to find which COM port the
USB drivers are using:
• Windows 2000, Windows XP: Control Panel > System >
Hardware tab > Device Manager > Ports. Click the plus
sign to display the ports.
• Windows Vista: Control Panel > System > Device Manager
(Administrator permission required) > Ports. Click the plus
sign to display the ports.
Remember the port number. You will need it when
connecting to the instrument in Win-Situ.
GUiDeLineS AnD pReCAUTiOnS
•
DO NOT SUBMERGE.
• Operating system requirements for Win-Situ and USB TROLL Com
drivers: Windows 2000 Professional SP4 or higher, Windows XP
Professional SP2 or higher, or Windows Vista SP1 or higher.
USB TROLL COm
Direct Connect
0052510