In-Situ Rugged TROLL 200 Cable Suspension Kit - Manual

Instruction Sheet
Innovations in
Water Monitoring
Page 1
Suspension Kit for Rugged TROLL ® 200 Cable
Catalog Number 0080880
When your deployment of the Rugged TROLL® 200 or Rugged BaroTROLL® instrument
requires securing the cable to a carabiner or other secure fastener, In-Situ® Inc. recommends
using the suspension kit described here. This connector can support a combined cable and
instrument weight of up to 100 lbs (45.4 kg).
PLaCIng The COnneCTOR On The CabLe
Determine how far from the uphole end of the cable the connector should be placed. 1.
Make a loop in the cable and loosely bind it with one zip tie. 2.
Place the metal loop inside the cable loop. Push the zip tie up to form a tight band around 3.
the metal loop. Tighten the zip tie.
Place the second zip tie directly below the first and tighten. 4.