GW Instek GDS-2000 series Instruction guide for FreeWave software - Manual (Page 3)

ISO-9001 CERTIFIED MANUFACTURER
GOOD WILL INSTRUMENT CO., LTD.
NO. 7-1, JHONGSING ROAD, TUCHENG CITY,
TAIPEI HSIEN, TAIWAN
Install FreeWave
1. Execute Setup.exe to install FreeWave to your PC
2. Press next step icon until install process finished (Default install folder is C:\Program
Files\FreeWave\).
3. Connect GDS-2000 USB device port(rear panel) to PC via USB cable and setting the
interface type of DSO is USB（UtilityÆF2ÆF1）
4. First time connects GDS-2000 to PC and select USB interface. The hardware install
message would notice to user, press install continuously or install driver as below steps:
A) Connect PC and GDS-2000 in USB mode,
but the driver is not installed. The device
manage would disappear error message as
below (Orange square shows the unknown
device for PC).
B) Click right button of mouse in the question
mark, and select “Update Driver”
3