GW Instek GPT-9800 series Quick Start Guide - Manual (Page 19)

OPERATION
19
Select a Utility Setting.
 Choose a utility by pressing the corresponding LCD,
BUZZ, INTER or CTRL soft-key.
 The chosen utility will be displayed.
 Use the UP/DOWN arrow keys to highlight a
setting.
 Use the scroll wheel to choose a parameter for the
setting.
L C D
(Example)
NOTE
The INTERLOCK function is set to OFF by default
in the Common Utility>CTRL menu. To increase
safety, set INTERLOCK to ON and use the
accompanying Interlock connector to enable
testing.
Save the Common Utility Setting
 To save any changes, press the EDIT/SAVE key. EDIT/SAVE
The tester will return to the VIEW status.
Cancel and Exit the Common Utility Menu
 To exit and cancel any changes, press the ESC key.
ESC
The tester will return to the VIEW status.