Detcon 1600-N1P-RD - Manual (Page 12)

1600/6400-N1P-RD
5.3.5 View Alarm History
View Alarm History shows the logged incident history of each gas channel. Select the gas channel of interest
using the up and down arrows for Channel. The history log will show all recorded events including alarms,
faults and maintenance records. These are displayed from most recent to last. They are displayed in blocks of
eight entries. Entries will show the date/time and the specific condition of when the incident was started. It
will then show the date/time and specific condition of when the incident ended. The readings are recorded in
chronological order. By inspection the user can determine the start time, finish time, and duration of every
incident. To scroll further back in time, use the up arrow adjacent to Scroll. The unit will scroll in blocks of
eight entries. The unit has capability to record up to 1000 events. When the log is full, the oldest events will
be discarded.
Figure 9 View Alarm History
5.3.6 View Tag Information
The View Tag Information screen displays the current tag names assigned to each active gas channel. To add
or change a Tag Name, press on the line. An alphanumeric screen showing 10 characters will appear. Use the
up and down scrolling arrows to set the tag name. When each entry is complete, press the ‘ENTER’ key to
save the entry.
Figure 10 View Tag Information
1600/6400-N1P-RD- Instruction Manual Rev. 1.0 Page 8 of 14