Detcon P-1000 - Manual (Page 13)

P-1000
Portable Model 1000 H2S Analyzer Rev. 1.0 Page 9 of 24
5. Save the file with an appropriate name for later recall. The Software will then prompt for a Plot Setup.
Figure 9 Plot Setup Screen
6. HOBOware™ will then display a graph of the data logged during the Initial Operational Tests of the
Analyzer.
Figure 10 H2S graphic display
NOTE: the sample rate of Figure 10 was set to 1-second intervals for the purpose of clarity.
The display acquired from your unit may look different from Figure 10, but should show the
application of gas, the highest reading, and the removal of gas as shown here.
For more information on the HOBOware™ Software, refer to the HOBOware™ User’s Guide.