Detcon 880RS-N4X - Manual (Page 14)

880R-N4X
880R-N4X Instruction Manual Rev. 0.1 Page 10 of 18
Figure 19 Inputting the number of channels
5) Select the “EXIT” box to exit the “System Configuration Screen” and return to the “Main Screen”.
6) The “Channel Description”, “Gas Type”, and the range decimal point must be setup in the Remote Display
to match the information used to setup the Main 880. Sensor Range and Alarm information should not be
altered at the Remote Display. (This information is transferred over from the Main 880). Using the wand
to select a channel from the “Main Screen” will open that channels corresponding “Channel X Details
Screen” (Figure 20).
Figure 20 Channel Detail Screen
a) Select “Channel Description”. The keyboard will appear, allowing the input of the Channel Tag
Name, or a brief description of the sensor, up to 20 characters maximum. The “Channel Description”
here must match the “Channel Description” entered at the Main 880.