Detcon 880RS-N4X - Manual (Page 12)

880R-N4X
880R-N4X Instruction Manual Rev. 0.1 Page 8 of 18
4.3 880 Remote Display Setup
The remote display must be setup to match the main 880. The screens are duplicates of the Main 880;
therefore, the setup is accomplished in much the same manner as the main unit. If the 880 Remote Display is
not set up to match the Main 880, the resulting displays will be inconsistent and erroneous.
1) From the “Main Screen” (Figure 15), enter the “System Configuration Screen” by touching the “System
Configuration” box with the wand.
2) The display will prompt for a password to enter the 880 “System Configuration Screen”. The default
password is “1234”. Enter the password in the Pop-Up Screen and press enter to continue. This will open
the “System Configuration Screen” (Figure 16 – Analog, Figure 17 - Serial).
Figure 15 Main Screen
Figure 16 Analog Configuration Screen