Detcon 10C Facilities - Manual (Page 15)

Model 10C
10C Control Module Instruction Manual Rev. 0.0 Page 11 of 14
6.0 Specifications
Input Power 9VDC to 28VDC, 100mA maximum (TBD)
Operating Temperature -40deg to +70degC
Humidity: 10 to 95% Non-condensing
Inputs/Outputs: Channel 1 Serial Communications RS485 Modbus
Channel 2 Serial Communications RS485 Modbus
Relays
Relay Contact Terminations:
Common, Normally Open, and Normally Closed
Three Relays on board
Relay Contact Specification per Manufacturer:
Resistive Load: 5A, 250VAC; 2A, 30VDC
Inductive Load: 2A, 250VAC; 2A, 30VDC
Maximum Operating Current: 5A
Alarm/Fault Alarm Timing:
Alarms are reported to relays and LED annunciators as soon as they
appear over Modbus from the Slave SSCs. Report time for all
Mod10C slaves is about 32 Slaves per second.
Warranty: One year.
Five year fixed fee service policy.