DeFelsko PosiTector DPM v.3.1 Full Manual - Manual (Page 6)

3
Operation Overview Operation Overview
The PosiTector DPM powers-up when the center navigation
button is pressed. Readings are updated automatically each
second. To preserve battery life, the Gage powers down after
approximately 5 minutes of no button activity. All settings are
retained.
Button Functions- Normal Operation
The Pause/Resume (+) button stops values from automatically
updating to allow for closer examination of the relationship
between the values or to allow time to manually record the entire
dataset. Press (+) again to resume.
Scroll through
Trend Charts
(Advanced only)
Access the Menu
Pause / Resume
Restore brightness
after dimming
(Advanced only)
Wrist Strap
We recommend attaching and wearing the
supplied wrist strap.
1
2
Protective Lens Shield
The LCD is covered with a thin plastic film for protection against
fingerprints and other marks during shipment. This film, while
usually removed before using the Gage, can be left in place to
protect against paint overspray or debris. Replacements can be
purchased.
Protective Cap
The PosiTector DPM is shipped with a protective plastic cap over
the surface temperature sensor. Remove this cap prior to use.
Replace it when the Gage is not in use to protect the sensor.