DeFelsko PosiTector DPM v.3.1 Full Manual - Manual (Page 16)

13
Memory Management Memory Management
Scroll through
display modes
(Advanced only)
Delete last dataset
Access the Menu
Store a dataset in
memory
Restore brightness
after dimming
(Advanced only)
The PosiTector DPM has internal memory storage for recording
measurement datasets. Stored datasets can be reviewed
on-screen or accessed via computers, tablets and smart phones.
Datasets are date and time-stamped. Datasets can be stored
manually (using the (+) button), or automatically using the
Auto Log mode (pg. 17).
Selects the type of batteries used in the Gage from a choice of
“Alkaline”, “Lithium” or “NiMH” (Nickel-metal hydride
rechargeable). If NiMH is selected, the Gage will trickle charge the
batteries while connected via USB to a PC or optional AC charger.
The battery state indicator icon is calibrated for the selected
battery type. No damage will occur if the wrong battery type is
selected.
DeFelsko recommends the use of eneloop (NiMH)
rechargeable batteries. It may take as long as 12 hours to charge
dead batteries.
Converts the display from Celsius (°C) to Fahrenheit (°F) or vice
versa. Stored measurements in memory are not converted.
Units
Battery Type
NOTE:
Converts displayed and printed words to the selected language.
Language
- Switching units will close any open memory batch.
- Alarm values do not have units. NOTE:
Button functions with Memory ON: